Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Franconia?
Garage door work in Franconia typically runs $150 – $600 for a repair, and $700 – $2,200 for a full new door installation. Spring replacement, the most common call we get, is typically $180 – $340 for one spring. Every job is priced on its own with a free written estimate, and that written estimate sets the final price.
That’s the short answer. The rest of this guide breaks the numbers down line by line, explains what pushes a job toward the top of a range and what keeps it at the bottom, and covers the local details that matter when you’re getting quotes in Franconia.
Key Takeaways
- Typical repair jobs in Franconia land between $150 and $600. Most single-issue repairs sit in the lower half of that.
- One torsion spring replacement is typically $180 – $340. A matched pair is usually replaced together, so expect roughly double that range for a pair.
- A brand-new door, installed, is typically $700 – $2,200, and the door itself is most of that.
- We service eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, which means we usually know the hardware before we arrive.
- Estimates are free. Call (833) 508-9704. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Garage Door Cost Breakdown (2026)
Here’s what each job typically costs in Franconia. These are estimated ranges for the work itself, based on the market as of 2026. Treat them as a planning number, not a quote.
| Service | Typical estimated cost |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
Two things to keep straight when you read that table. First, the spring line is for one spring. Most doors use two torsion springs, and they’re almost always replaced as a matched pair, so budget about twice the one-spring range for a pair. Second, the installation range covers the door and the labor. It’s a wide range because a basic single-car steel door and a large insulated double-car door with windows aren’t the same product, and the door is the biggest line item in the job.
What pushes a job higher in a range: a door that needs both springs and cables, an opener that’s at the end of its life rather than a small fix, heavier doors (insulated or wood), and any job that turns out to involve more than one failed part. What keeps it lower: a single worn part, a straightforward opener repair like a logic board or a safety sensor, and a door that’s otherwise in good shape. If we open a door and find a second problem, you hear about it before any work continues.
Springs and cables are the genuinely dangerous parts of a garage door. They’re under high tension, and the torsion system alone can cause serious injury if it releases while someone is working on it. We don’t recommend handling those parts yourself. Our technicians have up to 14 years of experience with them, and if you’re booking spring repair, book it with someone who does it every day.
What Affects Garage Door Pricing in Franconia
Five things move the number more than anything else.
- Which parts failed. A single worn roller is a small job. A spring that let go and took a cable with it is two jobs. The part count is the biggest single driver of what you pay.
- Door size and material. A standard single-car steel door sits near the bottom of the installation range. A double-car insulated door, or a wood or custom-look door, sits higher. Insulated doors are heavier, too, which means spring sizing matters more.
- Brand and hardware. LiftMaster and Chamberlain openers have their own logic boards and sensor setups. Genie uses different drive systems. Clopay and Amarr panel specs vary by model. When the technician already knows the hardware, the job goes faster, and that’s reflected in the estimate. We service all eight of those brands plus Wayne Dalton, Craftsman, and Raynor.
- Whether the door needs parts on the spot or a special order. Standard springs, rollers, and sensors are quick. A discontinued panel or a non-standard opener component can add a wait.
- How the job fits into the house. Low-clearance garages, tight side-room for tracks, and doors that share a wall with a living space sometimes need extra fitting. This is common in Franconia’s mix of older colonials, split-levels, and townhomes, where garages were built for smaller cars and different door styles than the ones on the market today.
One local factor that isn’t about price but is worth knowing: a garage door that won’t close is a security issue, not a convenience one. If the door is stuck open or won’t latch, that gets treated as urgent, and we offer garage door repair in Alexandria and the surrounding area with same-day and emergency service for exactly that situation.
Repair prices vs. installation prices
It’s worth separating the two. Repair is fixing what’s there: a spring, a cable, a roller, a track, a panel, or an opener. Those are the $110 to $600 jobs. Installation is a new door or a new opener, and those are the $250 to $2,200 jobs. A repair that uncovers a door too far gone to fix is the case where the two meet, and we’ll tell you plainly when that happens rather than selling a repair that won’t hold.
How to Save on Garage Door Cost in Franconia
A few practical things that keep the number down without cutting corners on the parts that matter.
- Replace springs in pairs. It sounds like more money up front, and it is. But two springs installed at the same time wear at the same rate. Replacing one now and one in a year means paying for two separate service visits, and the second spring often fails shortly after the first.
- Deal with noise and small issues early. A door that squeaks, shudders, or runs slower than it used to is usually telling you a roller or a track is wearing. A $110 – $220 roller job now is cheaper than a spring-and-cable job later. And it’s quieter.
- Get the opener checked when you replace the door. If you’re installing a new door, the old opener has to lift it. A heavier insulated door can strain an older opener and shorten its life. Combining opener installation with door installation means one visit, not two.
- Ask for the written estimate before work starts. Any reputable garage door company will put the parts and the labor in writing. Ours are free. Call (833) 508-9704 and we’ll get you a number for your specific door.
- Match the door to the garage. If you’re replacing, a standard steel door in a standard size sits near the bottom of the $700 – $2,200 range. Custom sizing and premium materials are what push a job toward the top. Know which one your garage actually needs before you shop.
What we don’t recommend: waiting on a broken spring or a frayed cable. Those are the two parts that fail dangerously. A door with a snapped spring can drop, and a cable that’s starting to fray can let go. If either is the problem, get someone out rather than working around it.
FAQs – Garage Door Cost
How much does garage door repair cost in Franconia?
Garage door repair in Franconia typically costs $150 – $600, and most single-issue repairs land in the lower half of that. The written estimate sets the final price. Call (833) 508-9704 for a free estimate: we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You can also read more about our full repair service before you call.
How much does a new garage door cost installed in Franconia?
A new garage door installed in Franconia typically costs $700 – $2,200, depending on door size, material, and insulation. A standard single-car steel door sits near the low end. Insulated double-car doors and custom sizes sit higher. garage door installation includes taking the old door down, so you’re not paying twice for that step. Call (833) 508-9704 for an exact quote, and estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper in the short term: a typical repair runs $150 – $600 against $700 – $2,200 for a new door. Replacement makes more sense when the door itself is failing (cracked panels, a bent bottom section, rot, or a door that’s out of square), or when repairs on several parts are stacking up. A good rule of thumb: one or two failed parts is a repair, a door that’s failing across several parts is a replacement decision. We’ll tell you which one you’re looking at. Call (833) 508-9704 for a free assessment.
How much does garage door spring repair cost in Franconia?
Spring repair in Franconia typically costs $180 – $340 for one spring. Because most doors run two springs and they’re replaced as a matched pair, budget roughly double that for a pair. Springs are under high tension: don’t try to replace one yourself. Our technicians have up to 14 years of experience with them. For spring repair, call (833) 508-9704 and we’ll quote your door.
Can you come today?
Same-day service is often available, especially for a door that won’t close or is stuck open. Call (833) 508-9704. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. If you call outside dispatch hours, we’ll book you into the next opening. Same-day work isn’t priced higher than any other job: the written estimate is the price.
Why do quotes from different garage door companies vary so much?
The spread usually comes down to three things: the quality of the parts (a standard spring and a heavy-duty spring cost different amounts and last different amounts of time), whether the quote covers the whole job or just the visible part, and whether the company works on your specific brand. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so there’s no learning curve on the hardware. Ask every company you call for a written estimate that lists the parts. Call (833) 508-9704 for ours; estimates are free.
Does emergency service cost more?
No. A door that won’t close is urgent, but the price is set by the job, not the hour. The written estimate is the number. Call (833) 508-9704. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. For a broken spring or a door that’s stuck, see our emergency garage door service.
What brands do you work on?
Eight of the most widely installed garage door and opener brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That covers most of what’s on garages across Franconia and the surrounding area. When we arrive knowing the logic board on a LiftMaster or the drive system on a Genie, you’re not paying for someone to figure it out on your time. Call (833) 508-9704 for a free estimate on your brand.
Whether you need a spring replaced, an opener that’s stopped responding, or a full new door, the next step is the same: a free estimate with the price in writing before anyone touches the door. Call (833) 508-9704 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Every job is priced per job by the written estimate, and our technicians bring up to 14 years of experience to the hardware in your garage.
Pricing reflects the Franconia market as of 2026. Garage Door Repair Alexandria Pros offers free estimates – call (833) 508-9704.
Written by the team at Garage Door Repair Alexandria Pros.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Xavier Whitfield"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Paige Brooks"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Aisha Nash